Company news
-
Main structure of the SMT machine
Do you know the internal structure of surface mount machine? See below: NeoDen4 Pick and place machine I. SMT mount machine frame The frame is the foundation of the mount machine, all the transmission, positioning, transmission mechanisms are firmly fixed on it, all kinds of feeder can also be pl...Read more -
Three kinds of mount head commonly used in mount machine
SMT machine is the instruction issued by the system in the work, so as to cooperate with the mounting head mounting work, the mounting head of pick and place machine is very important in the whole mounting system. Placing head plays a great role in the process of placing components on the mountin...Read more -
What structure does reflow oven consist of?
NeoDen IN12 Reflow oven is used to solder circuit board patch components in SMT production line. The advantages of reflow soldering machine are that the temperature is easily controlled, oxidation is avoided during the welding process, and manufacturing costs are more easily controlled. There is...Read more -
What are the benefits of using AOI in SMT production?
SMT offline AOI machine In SMT production line, the equipment in different links plays different roles. Among them, the automatic optical detection equipment SMT AOI is scanned by optical method to read the images of devices and solder feet through the CCD camera, and to detect the solder paste,...Read more -
What are advantages of SMT machine
What are advantages of SMT machine SMT pick and place machine is a kind of technology products now, It can not only replace a lot of manpower to mount and identify, but also more rapid and accurate, rapid and accurate. So why do we have to use pick and place machine in the SMT industry? Below I a...Read more -
How to judge PCB board quickly
When we get a piece of PCB board and don’t have any other test tools on the side, how to quickly have a judgment on the quality of a PCB board, we can refer to the following 6 points: 1. The size and thickness of PCB board must be consistent with the specified size and thickness without deviation...Read more -
Some attentions for SMT machine Feeder use
No matter what kind of SMT machine we use, we should follow a certain principle, in the process of using SMT Feeder also should pay attention to some matters, to avoid problems in our work. So we should pay attention to when we using SMT chip machine Feeder? Please See below. 1. When installing p...Read more -
General operation process of SMT machine
The SMT machine in the process of operation needs to adhere to certain rules, if we do not run the PNP machine in accordance with the rules, it is likely to cause machine failure, or other problems. Here is a running process: Inspect: to check before using pick and place machine. First of all, w...Read more -
How does the chip mounter machine lack of air pressure？
In SMT placement machine production line, the pressure is need us to check timely, if production line pressure value is too low, there will be a lot of bad consequences. Now, we will give you a simple explanation, if the multi-functional chip machine pressure is insufficient how to do. When our m...Read more -
What are the characteristics of reflow welding process?
In the process of reflow oven, the components are not directly impregnated in the molten solder, so the thermal shock to the components is small (due to the different heating methods, the thermal stress to the components will be relatively large in some cases). Can control the amount of solder a...Read more -
Why does the SMT production line use AOI?
In many cases, the assembly line of the SMT machine is not standard, but it has not been detected, which not only affects the quality of our production, but also delays the time of testing. At this time, we can use AOI testing equipment to test the SMT production line. AOI inspection system can d...Read more -
How to choose a suitable SMT machine
Now the development of pick and place machine is great, the SMT machine manufacturers are more and more, the price is uneven. A lot of people don’t want to spend a lot of money, and they don’t want to come back with a machine that doesn’t meet the needs they want. So how to choo...Read more
