What Causes The Poor Suction of The SMT Machine?

We often encounter poorer and poorer suction capacity of the SMT machine in the process of using SMT machine for production and processing, sometimes even the suction is crooked, so what causes this situation? Many people think it is the quality of pick and place machine, in fact, it is not. The main reason is that there are several reasons caused by the following, let’s take a look.

I. The SMT nozzle problems.

If we have poor absorption capacity, the first need to check the nozzle has no damage to the situation, because almost 80% of the probability of damage caused by the nozzle.

II. The SMT Feeder appears abnormal.

Feeder is our supply transport use of machinery and equipment, if the Feeder jam or installation problems, will also be easy to have problems, which will also lead to poor absorption capacity

III. The internal air pressure of the mounting machine is not enough.

We must check the air pressure in the process of starting the placement machine, many times the air pressure will leak, we need to supplement the operation, air pressure is generally acting on the nozzle, the nozzle on the components to absorb, the ability to absorb is composed of air pressure.

IV. The set absorption height problems.

If we set in the placement machine system is too low to absorb the height, there will be sucking up the situation is also very common. We need to slowly upward for a fine adjustment, slowly test changes.

Features of NeoDen10 Pick and Place Machine

1. Equips double mark camera + double side high precision flying camera ensure high speed and accuracy, real speed up to 13,000 CPH.

Using the real-time calculation algorithm without virtual parameters for speed counting.

2. Marbel body,weight 1100KG, stand solid without shaking.

3. Front and rear with 2 fourth generation high speed flying camera recognition systems, US ON sensors, 28mm industrial lens, for flying shots and high accuracy recognition.

4. 8 independent heads with fully closed-loop control system support all 8mm feeder pick up simultaneously,speed up to 13,000 CPH.