What Causes SMT Machine Inductor Failure?

Inductive failure is a fault that we often encounter in the process of automatic mounter placement production, many times due to SMT machine inductive failure reduces the effect and rate of our placement. Then we should how to solve this fault?

Usually, cause inductor failure is usually composed of 4 kinds of reasons, operation error, core reaction, copper wire link, magnetic core arrangement four aspects:

1. Operation error: sometimes, due to a small operational error on our part, may lead to SMT chip machine in the process of working internal crack space, so that the inductor has a chance out of the failure. We should strictly follow the specified steps or the steps specified in the manual to operate the pick and place machine.

2. Magnetic core reaction: for processing products process, because many of the relevant configuration is not in place, this situation is generally caused by the choice of relatively small manufacturers of substandard configuration, resulting in the magnetic core does not get a reasonable release space, which will also prompt the inductor problems.

3. Copper wire link: the same for processing plants, in the process of copper wire linking irregular, incorrect linking practices, or copper wire using inferior products, which will also lead to SMT chip machine an inductor failure cause.

4. Magnetic core arrangement: SMT placement machine in the inductor has a lot of impurities inside or use of inductor magnetic core is counterfeit products, this magnetic core will directly affect the inductor, and even have a great impact on our placement production tasks.

Features of NeoDen 10 pick and place machine

1.8 independent heads with fully closed-loop control system support all 8mm feeder pick up simultaneously,speed up to 13,000 CPH.
2.Equips double mark camera + double side high precision flying camera ensure high speed and accuracy, real speed up to 13,000 CPH. Using the real-time calculation algorithm without virtual parameters for speed counting.
3.Patented sensor, besides common PCB , can also  mount  black PCB with high accuracy.
4.Raise PCB automatically, keeps PCB on the same surface level during placement ,ensure high accuracy.