Simple Analysis of SMT Production Machine Feeding System

SMT production machine feeding system is responsible for the mounter to convey the need to mount components of a complete set of systems, usually talking about the feeding system components called Feeder. The following is to share with you the SMT production machine feeding system analysis and explanation.

I. Over the top arch type mounter can support different SMT Feeder types, including bulk / tape-and-real / tube / odd-form and other customer designs.

High-speed turrets and massively parallel systems are fed entirely by bulk cartridges or tape-and-real packages.

II. When the packaging form of the placement components is not bulk or tape material, over-the-top arch type SMT placement machine may be the only choice: SMT high-speed placement machine is excluded from consideration, because it can not automatically feed these materials. Therefore, SMT placement processing manufacturers should look for component placement equipment that can expand their existing placement options.

III. The role of the Feeder in the SMT machine feeding system is to mount the SMD placement components on the Feeder, which provides components to the mounter for placement. For example, there is a kind of PCB needs to be mounted on six kinds of components, then you need six Feeders to install the components for the mounter feed.

IV. The classification of the Feeder

1. Distinguished by machine brand and model. Generally speaking, the feeder used by different brands of mounter is not the same, but the same brand of different models can generally be common.

2. Distinguish according to the package size and type of component tape. Generally divided into 4 types: tape, tube, tray, bulk.

Banded and will distinguish the size of the band (such as 8mm, 16mm, 24mm, 32mm, 44mm, etc.)

Ensuring component integrity in the SMT machine Feeder system is a key factor in improving placement reliability and efficiency. Components in the feeder that are twisted, reversed, vacant and fed in the wrong position will be difficult to pick up or, if picked up, difficult to recognize. If the components with the above defects are pasted onto the board, it will lead to rework. Therefore, to ensure that the SMT mounter feeder is in good condition when working, it is necessary to maintain the SMT mounter Feeder on a regular basis.

Features of NeoDen10 SMT production machine

1. Support up to 4 pallet tray of chips (optional configuration), larger range and more option.

2. Brand functional parts Japan: THK-C5 grade grinding screw, Panasonic A6 servo motor, Miki high performance coupling;

Korea: Sungil base, WON linear guide, Airtac valve and other industrial brand parts

All with precision assembly, less wear and aging, stable and durable precision.

3. Equips double mark camera + double side high precision flying camera ensure high speed and accuracy, real speed up to 13,000 CPH.

Using the real-time calculation algorithm without virtual parameters for speed counting.