SMT machine is the most critical and core equipment of SMT assembly line. Whether the normal work of the pick and place machine directly affects the operation of the production line of the patching plant, so in the usual production process, must be diligent maintenance, so that the SMT machine to play the most effectiveness, to ensure the stability and accuracy of the operation of the pick and place machine. SMD machine staff in the operation of the production process need to pay attention to avoid safety failures. The following to introduce you to the SMT machine daily operation process required precautions.
1. The machine in operation, the operator must be careful operation, do not head, hands into the range of machine operation to avoid accidents.
2. It is strictly prohibited to check the machine in operation, is running the machine if a fault occurs, must be in the machine stop state to check the machine.
3. When the operator is checking the machine fault, no one is allowed to start the machine, and put up a warning sign forbidden to close the gate under maintenance.
4. When manually moving the parts within the equipment, you must confirm that the hand-held parts are the parts that can withstand the force, to avoid damage to the equipment parts because they cannot withstand.
5. When order the equipment part to move alone, must confirm the mount head keep have enough height, will not hit to the rail or other parts.
6. If abnormal alarm or abnormal sound occurs in equipment use, first suspend all operation, notify technical personnel to the scene to solve, strictly forbid to take measures privately, destroy accident scene.
7. It is strictly prohibited to disassemble the feeder during the operation of the equipment, easy to crash the laser lens.
8. When maintaining or cleaning the interior of the equipment, it is strictly forbidden to use the air gun to blow the components to splash the precision parts, easy to jam the machine.
9. When disassembling and assembling feeder strictly forbidden to use brute force brutal operation, mount head is located above the feeder, strictly forbidden to disassemble the feeder.
Track width adjustment when the placement machine track than the substrate should be about 1mm wide, too narrow easy to card board, too wide easy to fall board.
NeoDen9 pick and place machine features
1. Equips Panosonic 400W servo motor,to ensure better torque and acceleration for achiving stable and durable placement.
2. Independent control of 6 placement heads, each head can be up and down separately, easy to pick up, and the standard effective mounting height reach 16mm,meet the requirements of flexible SMT processing.
3. Supports both electric feeder and pneumatic feeder at max 53 slots tape reel feeders with machine width 800mm only, to ensure the high efficiency with flexible & worthiest space.
4. Equips with 2 mark cameras to ensure that all picking positions can be photographed.
5. Applicale for t he maximum PCB width at 300mm, meets most of the PCB sizes.
Post time: Jul-06-2022