1. Host
1.1 Main Power Switch: turn on or off the mainframe Power
1.2 Vision Monitor: Displaying the recognition of images or components and marks obtained by the moving lens.
1.3 Operation Monitor: The VIOS software screen that displays the Operation of the SMT machine. If there is an error or problem during the Operation, the correct information will be displayed on this screen.
1.4 Warning Lamp: Indicates the operation conditions of the SMT in green, yellow and red.
Green: The machine is under automatic operation
Yellow: Error (return to origin cannot be performed, pick up error, recognition failure, etc.) or interlock occurs.
Red: The machine is in emergency stop (when the machine or YPU stop button is pressed).
1.5 Emergency Stop Button: Press this Button to trigger Emergency Stop immediately.
2. Head Assembly
Working head assembly: move in the XY (or X) direction to pick up parts from the feeder and attach them to the PCB.
Movement Handle: When the servo control is released, you can move with your hand in each direction. This Handle is usually used when moving the workhead by hand.
3. Vision System
Moving Camera: Used to identify marks on the PCB or to track the photo position or coordinates.
Single-Vision Camera: Used to identify components, mainly those with pin QPFs.
Backlight Unit: When identified with a standalone visual lens, illuminate the element from the back.
Laser Unit: The Laser beam can be used to identify parts, mainly flaky parts.
Multi-vision Camera: can identify a variety of parts at one time to accelerate the recognition speed.
4. SMT Feeder Plate:
Band-loading feeder, bulk feeder and tube-loading feeder (multi-tube feeder) can be installed on the front or rear feeding platform of the SMT.
5. Axis Configuration
X axis: move the working head assembly parallel to the PCB transmission direction.
Y axis: Move the working head assembly perpendicular to the PCB transmission direction.
Z axis: controls the height of the working head assembly.
R axis: control the rotation of the suction nozzle shaft of the working head assembly.
W axis: adjust the width of the transport rail.
Post time: May-21-2021