SMT machine needs to use a lot of electronic materials, electronic materials are generally loaded with trays or reels. When the production line began mass production, the need for material, when the material is almost finished, it is necessary to receive material, when the batch of PCBA board production is finished then need to change the material, so the material, receive material, change the material needs to be very careful. If you get it wrong, it will cause batch product rework or scrap, which will cause a very big waste of time, money. Therefore SMD how to prevent think wrong material is very critical.
How to prevent the placement machine human error material? There are the following points:
1.Pick and place machine installation of anti-mistake material system.
On the material, change the material, receive material, with a scanning gun to scan the machine on the material station number, and then scan the bar code label on the material, the system automatically check whether the material on the wrong, such as errors, the system will automatically alarm and lock the line body, IPQC to confirm the reasons for checking and then enter the password to lift the alarm.
2.The technician will install the material tray on the SMT Feeder again to confirm the material, after installation, then let the line manager or QC to the material.
3.After the scan gun scan code check, production line operator check, line manager or QC check again, to confirm that the material is correct to start production, generally after three checks, almost no wrong material situation.
4.After the SMT line produces the first board, the first piece of inspection and verification, to confirm that there is no error to start mass production, the subsequent halfway need to change the material to receive material, then again in accordance with the first step to operate.
About NeoDen
Established in 2010 with 100+ employees & 8000+ Sq.m. factory of independent property rights, to ensure the standard management and achieve the most economic effects as well as saving the cost.
Owned the own machining center, skilled assembler, tester and QC engineers, to ensure the strong abilities for NeoDen machines manufacturing, quality and delivery.
8 hours, solution provides within 24 hours.
The unique one among all of the Chinese manufacturers who registered and approved CE by TUV NORD.
NeoDen supplies life-long technical support and service for all of the NeoDen machines, moreover, regular software updates based on the using experiences and actual daily request from the endusers.
Post time: Dec-06-2022