We are in the PCB mounting machine test, generally in addition to its quality problem, is the performance of the SMT machine. Good PNP machine whether on the veneer, time, or in the production speed is the need for detection, so we should how to correctly detect to distinguish the veneer machine performance is good or bad? Let’s break it down:
- Detection of suction problem: mount machine relies on nozzle to absorb and attach, Nozzle depends on material, vision and vacuum to complete the task. If there is a suction problem, it will greatly reduce the productivity of the mount machine.
- Test Reliability: Reliability refers to whether the vendor is reliable and whether each vendor uses different software. With the progress of The Times, the types and methods of mounting are also developing. If the vendor does not update the software or updates slowly, there will be little room for improvement. You can first look at the time and content of the vendor’s software update before purchasing.
- Test mount speed: we can generally mount the speed of pick and place machine divided into high speed mount machine, medium speed mount machine and small mount machine (low speed). The slower the speed, the lower the price. If there is no rigid requirement, you can choose medium speed or low speed, cost-effective will be relatively high.
- Test mount quality: the same speed, the mount quality of the product is very important, not only affects our production rate, but also affects our time and material consumption.
- Test mount ability: mount ability of mount machine includes its mount speed, mount quality and precision. The stronger the mounting capacity, means that we spend less time, the faster the production, thus improving our production efficiency. On the contrary, it not only reduces our production efficiency, but also wastes a lot of materials because the failure rate of the mount machine is too high.
Post time: Feb-26-2021