Five knowledge points to use the SMT machine

pick and place machine

NeoDen K1830 PNP machine

When we use SMT machine, we must remember five knowledge points. These five points are just points that can help us easily and conveniently use the patch machine, and can also extend the service life. So what are these five points? Please see below.

1. SMT pick and place machine in use will have a fever, we will worry about this situation will damage the equipment, in fact, the general fever is caused by the overload of the equipment, if you turn on the fever, then you have to check the internal problems of the equipment, to repair in time.
2. When something goes wrong while we’re using SMT mounting machine and we want to fix it, we should start from the system, to avoid the equipment can not work to bring huge losses.
3. In order to extend the service life of the SMT machine, we should carry out good maintenance of the patch machine in our usual work, and clean the machine regularly, because some parts of the machine are dirty, which may also affect the use of the patch machine.
4. In the more extreme weather, you’d better not use SMT placement machine, this is really the security risks, may also give a negative impact on work, that we need to pay attention to.
5. We use the SMT machine to master the relevant specifications, understand some of the relevant operational matters, especially where attention needs to be paid.


Post time: Apr-28-2021

Send your message to us: