NeoDen Desktop SMD Pick and Place Machine
NeoDen4
Desktop SMD Pick and Place Machine
The fourth-generation model
Description
Specification
| Product name | NeoDen Desktop SMD Pick and Place Machine |
| Machine Style | Single gantry with 4 heads |
| Placement Rate | 4000 CPH |
| External Dimension | L 870×W 680×H 480 mm |
| Max applicable PCB | 290mm*1200mm |
| Feeders | 48pcs |
| Average working power | 220V/160W |
| Component Range | Smallest Size: 0201 |
| Biggest Size: TQFP240 | |
| Max Height: 5mm |
Details
Any size nozzle can be installed in any of the four locations in the head.
So a single machine can handle all of the necessary components without the need for nozzle changes.
The spring-loaded nozzles simply snap in and pull out of the head.
Located on the right side of the machine.
When enabled, this camera first ensures that a component is attached to the proper nozzle.
If the camera detects the absence of a component, the machine will make up to two additional attempts to pick a component before asking the user for further instructions.
Once a component has been verified as “picked”, the camera verifies its position relative to the nozzle.
Machines equipped with the auto-loading rail system can accommodate boards from to in width, and in length. Even when the rail system is installed, any space left over on the table is still available for trays and short tapes.
Rear-ejection is useful when the machine is connected to an optional conveyor that can deliver the finished board directly to the reflow oven or to another NeoDen4.
The electric feeders are inexpensive but sophisticated microprocessor controlled units paired will tape peelers.
In addition, the vibration feeder (included) can handle up to 5 separate tubes.
The amount of space available for tray-fed components and short tapes depends on the available real estate on the table.
Rail Single:
This option is the most frequently used on machines equipped with the rail system.
Checking this box will cause the machine to feed a single board (or panelized board) to the appropriate location and then commence fiducial recognition and component placement.
Rail Multi:
This option is used when boards (or panels) longer than the machine table are to be populated.
In this mode, the machine will place components between the first set of fiducials, then advance the board automatically to place components between the next set of fiducials, and so on.
Eject front:
Package
If you need, please feel free to contact us for more information.
About us
Factory
Certification
Exhibition
One Stop SMT Equipments Manufacturer
If you need, please feel free to contact us for more information.
Q1: What products you sell?
A: Our company deal in the following products:
SMT equipment
SMT accessories: Feeders, Feeder parts
SMT nozzles, nozzle cleaning machine, nozzle filter
Q2: When can I get the quotation?
A: We usually quote within 8 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.
Q3: Can l visit your factory?
A: By all means, we warmly welcome your arrival, Before you take off from your country, please let us know. We will show you the way and arrange time to pick you up if possible.
